Cautions in Using Welding Machine
When you use laser welding machine, you should let professionals with laser and welding knowledge to operate. They not only need to master the key and password of the laser welding machine, but also need to guide other personnel to use the laser welding machine. Today, we will give you a detailed introduction of the matters needing attention in the use of laser welding machine.
1. When using the laser welding machine, there should be a special laser welding area, and a sign forbidding others to approach should be set in this area. When installing the laser welding machine, it should be installed in a fixed and horizontal place, not in an inclined place.
2. Attention should be paid to the control of environmental temperature and humidity. Humidity should not be higher than 35%, temperature should be between 5 and 30 degrees, and the temperature of the environment should not fluctuate too much. In addition, do not use laser welding machine in the environment of vibration, oil pollution, corrosion and high noise.
3. If the laser welding machine is used in winter, special attention should be paid to the temperature. If the temperature drops below zero, it will lead to ice in the water tank, which will cause damage to the water tank. Therefore, the environmental temperature of the laser welding machine can not be lower than zero. If the temperature drops below zero, the water in the water tank should be drained clean first. If the temperature of the environment changes dramatically, water vapor will form on the laser rod and lens, which will affect the normal use of laser welding machine. If it is found that water vapor has formed, it should be turned on first, then preheated before use.
When you use laser welding machine, you must pay attention to the above contents, especially the environmental temperature, to control the temperature within the prescribed range. In addition, if you find that there is water or stain in the shell of laser welding machine, you should use dry cloth to clean it, or use detergent to wipe it, but do not use gasoline or paint diluent. Alcohol can be used for wiping.